Characteristics of Composite Ventilation Pipe
The plate is manufactured by mechanization with smooth and flat surface, which improves the efficiency of air conveying, and the air leakage rate is only 10% of that of the sheet air duct. No matter in production, manufacture, installation or in use, no harmful substances to the environment, no rust, no mildew, no dust are produced.
No glass fiber duct dust and fibers, no odor; low thermal conductivity, excellent insulation performance; good sound insulation, sound absorption performance, no iron duct contraction and expansion of noise. Non-flammable, flexural, pressure-resistant, fast construction, low cost, service life of up to 20 years.
1. Face-style ventilation, large air volume, no sense of blowing. The system adopts the unique surface air outlet mode of the whole pipeline wall fiber permeating air and micro-porous jet. The air outlet area is large, the air volume is large, the wind speed is low, there is no sense of blowing, and the comfort is excellent.
2. Uniform distribution of overall air supply. Sauss system through the whole wall of the fiber gap or uniform distribution of the design of multi-row orifices, air distribution uniform at each point, to achieve a truly ideal overall uniform air supply.
3. Anti-condensation dew. Soss system seeps air through the whole pipe wall fibers and forms a cooling layer in the pipe wall shape, so that there is almost no temperature difference inside and outside the pipe wall. It solves the condensation problem thoroughly and does not need pipeline insulation.
4. Easy to clean and maintain, healthy and environmental protection. Because of the convenience of disassembly and assembly of Soss system, it is convenient to wipe and clean pipelines, so as to improve the indoor air cleanliness quality and meet the higher requirements of health and environmental protection.
Fifth, beautiful and high-end, colorful, personalized prominent. Various colors can keep harmony with any indoor environment style, simple and high-grade. At the same time, the system and color are completely personalized design and customization.
Sixth, light weight, roof load can be neglected. The Sauss system is made of special fibers and has a very light weight. It is about 1/40 of the traditional metal wind system. It is especially suitable for roofs where there is no load-bearing capacity.
Seventh, the system runs quietly and improves the environmental quality (Soss system has soft material, low wind speed, no resonance and transmission, quiet, improve the environmental quality).
8. Simple installation and shorter construction period. The cable or aluminium rail suspension system used in the Soss system is simple and fast. The installation time of the system is usually more than 1/10 of that of the traditional system, which greatly shortens the project cycle.
9. Flexible installation and reusable. The whole system is made of soft material, and there is no need to balance and calibrate when it is installed. When used, it will not be scratched, dented or leaked as easily as the metal pipe system, and the suspension device of the system is flexible, easy to install and reusable. It is the best choice in all kinds of places requiring temporary ventilation.
10. The cost of the system is saved in an all-round way and the performance-price ratio is high. The Soss system design scheme is simpler than the traditional air supply system, and it can replace the traditional air supply pipeline, air valve, diffuser, tuyere and other components, fittings, insulation materials and other single products. It has extremely light weight, simple transportation and installation, and saves the total cost of the system in an all-round way.
